HP 33120A - Status Reporting Commands

Status Reporting Commands
STATus:QUEStionable:CONDition?
Query the Questionable Data condition register and return the real-time
value of all bits set. Returns “0” if phase is locked or “64” if phase is
unlocked.
STATus:QUEStionable:ENABle <
enable value>
Enable bits in the Questionable Data enable register. The selected bits
are then reported to the Status Byte.
STATus:QUEStionable:ENABle?
Query the Questionable Data enable register. The function generator
returns a decimal value which corresponds to the binary-weighted sum
of all bits set in the enable register.
STATus:QUEStionable:EVENt?
Query the Questionable Data event register. The function generator
returns a decimal value which corresponds to the binary-weighted sum
of all bits set in the event register.
STATus:PRESet
Clear all bits in the Questionable Data enable register.
Chapter 2 Remote Interface Operation
Status Reporting Commands
26