Scanning With an External Instrument
(see page 239 for more information)
ROUTe
:SCAN (@<scan_list>)
:SCAN?
:SCAN:SIZE?
TRIGger
:SOURce {BUS|IMMediate|EXTernal|TIMer}
:SOURce?
TRIGger
:TIMer {<
seconds>|MIN|MAX}
:TIMer?
TRIGger
:COUNt {<
count>|MIN|MAX|INFinity}
:COUNt?
ROUTe
:CHANnel:DELay <
seconds>[,(@<ch_ list>)]
:CHANnel:DELay? [(
@<ch_list>)]
ROUTe
:CHANnel:ADVance:SOURce {
EXTernal|BUS|IMMediate}
:CHANnel:ADVance:SOURce?
ROUTe
:CHANnel:FWIRe {OFF|ON}[,(@<ch_list>)]
:CHANnel:FWIRe? [(
@<ch_list>)]
INSTrument
:DMM {OFF|ON}
:DMM?
:DMM:INSTalled?
This command redefines the scan list when executed.
This command applies to all channels in the instrument (Global setting).
Default parameters are shown in bold.
Chapter 5 Remote Interface Reference
SCPI Command Summary
186
To Next Page
Loading...
