2-1
Installation
Initial Inspection
2 Installation
Initial Inspection
WARNING TO AVOID HAZARDOUS ELECTRICAL SHOCK, DO NOT
PERFORM ELECTRICAL TESTS WHEN THERE ARE SIGNS OF
SHIPPING DAMAGE TO ANY PORTION OF THE OUTER
ENCLOSURE (COVERS, PANELS, METERS).
Inspect the shipping container for damage. If the shipping container or
cushioning material is damaged, it should be kept until the contents of
the shipment have been checked for completeness and the instrument
has been checked both mechanically and electrically. Procedures for
checking electrical operation are given in Chapter 3. If the contents of
the shipment are incomplete, if there is mechanical damage or defect,
notify the nearest Hewlett-Packard Office. If the instrument does not
pass the electrical performance tests given in Chapter 3, notify the
nearest Hewlett-Packard office. If the shipping container is also
damaged, or the cushioning material shows signs of stress, notify the
carrier as well as the nearest Hewlett-Packard office. Keep the shipping
materials for the carrier’s inspection. The Hewlett-Packard office will
arrange for repair or replacement without waiting for claim settlement.
To Next Page
Loading...
Need help?
General
