2-15
Installation
Additional Precautions for Service Engineers
recommends that you use a controlled static workstation.
• Handle the module by its front-panel. Avoid touching any components
or edge connectors. When you install the module, keep one hand in
contact with the protective bag as you pick up the module with your
other hand. Then, before installing the module, ensure that you are
grounded or make contact with the metal surface of the Mainframe
with your free hand to bring you, the module, and the mainframe to
the same static potential. This also applies whenever you con-
nect/disconnect cables on the front-panel.
To Next Page
Loading...
Need help?
General
