HP 425 - Installation Preparation Checklist

6
HP 425 802.11n Dual Radio Access Point Series
Specications
HP 425 Wireless Dual Radio 802.11n (AM) Access Point (JG653A)
Ports 1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
AP characteristics 1 RJ-45 serial console port
Radios Dual (a/n + b/g/n)
Radio operation modes Client access, Local mesh, Packet capture
AP operation modes Controlled
Wi-Fi Alliance Certication a/b/g/n Wi-Fi Certied
Physical characteristics 7.43(w) x 7.43(d) x 2(h) in (18.86 x 18.86 x 5.08 cm)
Weight 1.65 lb (.75 kg) mounting bracket
Enclosure Indoor, plenum rated
Memory and processor Single core @ 560 MHz, 128 MB ash, 128 MB SDRAM
Mounting Includes ceiling/wall mount kei as well as two ceiling mounting clips
Environment Operating temperature 32°F to 113°F (0°C to 45°C)
Operating relative humidity 5% to 95%, noncondensing
Nonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C)
Nonoperating/Storage relative humidity 5% to 95%, noncondensing
Electrical characteristics Description IEEE 802.3af PoE compliant for Gigabit Ethernet
Maximum power rating 12.9 W
Antenna (2) 4 dBi 2.4 GHz and (2) 5 dBi 5 GHz omnidirectional antennas
Number of internal antennas 4
Number of external antennas 4
Notes
Optional 48V DC power supply
Data sheet | HP 425 802.11n Dual Radio Access Point
Series