Provide adequate and redundant sources of power
Make sure that you have two high-line power feeds installed near your computer. These two power
sources usually come from the same external power grid, but occasionally may originate from
different grids or even entirely different sources.
For protection against a power-source failure, obtain and include two uninterruptible power supplies
in your installation.
For power consumption specifications, see the QuickSpecs document at:
http://www.hp.com/go/eva4400
Remove product from packaging
1. Remove product from boxes.
2. Verify that contents match your expectations and site requirements.
• EVA4400 controller enclosure should contain:
One 2U controller enclosure with two HSV300 or HSV300–S controller modules,
two power supply modules, two fan modules, and two battery modules installed.
◦
◦ Rack mounting hardware
◦ Two 2.0 meter FC copper cables
◦ Two power cords
◦ Installation documentation
◦ XCS controller software recovery CD
• Each FC disk shelf should contain:
◦ One 2U M6412 disk enclosure, two power supply modules, two fan modules, and
two battery modules.
◦ Rack mounting hardware kit
◦ Two 0.41 meter FC copper cables
◦ Two power cords
3. Inspect for damage.
If damage is present, contact your local HP representative.
Provide adequate and redundant sources of power 9
To Next Page
Loading...
Need help?
General
