5. Separate the display assembly from the computer (3).
6. If you need to remove the hinge cover:
▲ Squeeze the hinge cover (1), and then remove the hinge cover from the display (2).
The hinge cover is available as spare part number N21236-001.
7. If you need to remove the bezel:
a. Flex the top (1), the left and right sides (2), and then the bottom of the bezel (3) to release it.
b. Remove the bezel from the display (4). The bezel is secured with adhesive. Be sure to replace the
adhesive when installing a bezel.
The bezel is available as spare part number M50434-001.
Display assembly
51
To Next Page
Loading...
