HP 5328A - American Standard Code for Information Interchange (ASCII)

Model 5328A
Programming
SPD
Serial Poll Disable (ASCII
EM)
Terminates the serial poll mode. The 5328A can resume its normal data
output mode.
c. Addressed Commands:
GTL Go to Local (ASCII SOH)
Returns the 5328A to local (manual) control from remote control.
SDC Selected Device Clear (ASCII EOT)
Responds as with Device Clear or program code "P".
GET Group Execute Trigger (ASCII
BS)
Starts a measurement. This command provides thequickest method to start
a measurement cycle.
USA STANDARD CODE FOR INFORMATION INTERCHANGE
BITS
Table 5-4. American Standard Code for Information Interchange (ASCII)
r
-
UNIVERSAL
ADDRESS
----
t
UNLISTEN
t
UNTALK
COMMAND COMMAND
COMMANDS LISTEN TALK
ADDRESSES ADDRESSES
I
DATA WHEN ATN IS HIGH.
ADDRESSES WHEN ATN IS LOW.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com