HP 610 - Create a Mirror Image Copy; Stop Copying; Copy Setup Menu Options

use copier features
25
hp digital copier series
1
Load the original on the glass or in the ADF.
2
Load the T-shirt transfer paper in the main tray.
3
If you have installed the optional 250-sheet plain paper tray, press
Tray Select/Paper Type until the Upper Tray is selected.
4
Press until Iron-On appears and then press Enter to select it.
Selecting this option automatically activates the Mirror function.
5
Press Start Copy - Black or Start Copy - Color.
create a mirror
image copy
to create a mirror image copy of an original
1
Place the first original on the glass. If you are using the ADF, load
both originals there.
2
Press Special Features until Mirror appears, then press Enter.
3
If you wish to change the reduction/enlargement percentage as well,
enter a number using the keypad, or press or to adjust.
4
Press Enter.
Tip! If you do not wish to change the reduction/enlargement
percentage, press Enter after you have selected the amount
of Mirror Image you want.
5
Press Start Copy - Black or Start Copy - Color.
stop copying
` To stop copying, press Cancel on the front panel.
copy setup menu options
The following options are available in the Copy Setup menu.
GwenRG.book Page 25 Thursday, January 31, 2002 5:20 PM