HP 6125G - Page 32

28
Table 9 10 Gbps SFP+ transceiver modules available for the SFP+ ports
Product
code
Description
Central
wavelength
(nm)
Fiber
diameter
(μm)
Multimode
fiber modal
bandwidth
(MHz
×
km)
Maximum transmission
distance
JD092B
HP X130 10G
SFP+ LC SR
Transceiver
850
50/125
2000 300 m (984.25 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
62.5/125
200 33 m (108.27 ft)
160 26 m (85.3 ft.)
JD093B
HP X130 10G
SFP+ LC LRM
Transceiver
1310
50/125
1500
220 m (721.78 ft)
500
400 100 m (328.08 ft)
62.5/125
200
220 m (721.78 ft)
160
JD094B
HP X130 10G
SFP+ LC LR
Transceiver
1310 9/125 N/A 10 km (6.21 miles)
Table 10 SFP+ cables available for the SFP+ ports
Product code Cable descri
p
tion
Cable len
g
th
JD095B HP X240 10G SFP+ SFP+ 0.65m DA Cable
0.65 m (2.13 ft)
JD096B HP X240 10G SFP+ SFP+ 1.2m DA Cable
1.2 m (3.94 ft)
JD097B HP X240 10G SFP+ SFP+ 3m DA Cable 3 m (9.84 ft)
JG081B HP X240 10G SFP+ SFP+ 5m DA Cable 5 m (16.40 ft)
NOTE:
• To guarantee the functionality of the SFP+ ports, use only HP SFP+ transceiver modules.
• The SFP+ transceiver modules available for this blade switch series are subject to change over time. For
the most up-to-date list of SFP+ transceiver modules, consult your HP sales representative or technical
support engineer.
The SFP+ cables available for the HP 6125 blade switches are 10 Gbps SFP+ Cu cables, as shown
in Figure 15.