HP 9000 rp4440 - Figure 3-4 Processor Extender Board Switches

Chapter 3
Upgrade Procedures for 1.1 GHz mx2 Dual Processor Modules (A9730A)
Introduction
43
Step 8. On the Processor Extender Board, set the IPF/PA switch to the IPF position. Refer to Figure 3-4,
“Processor Extender Board Switches.”
Figure 3-4 Processor Extender Board Switches
Step 9. On the IO baseboard, set the CPU select switch on as shown in Figure 3-5, “IO Baseboard Select
Switches.”
Set switch to IPF