34
Looping video mode with USB adapter
• When the camera is connected to a USB adapter, the
video recording starts automatically. When the USB
adapter is disconnected, the recording will stop recording
after 30 seconds. Then it will automatically save the file
and turn the device off.
• When the camera is connected to a USB adapter, the
video recording starts automatically.
If you manually stop the recording:
the camera will automatically power off after being
idle for 10 minutes when Auto Power Off is set to 10
minutes.
OR
the camera will automatically power off after 30
seconds when the USB adapter is disconnected or
without power supply.
To Next Page
Loading...
