160 Appendix C
HP B2600 Chassis Codes
Chassis Codes
WRN 8A04 EXT IO No USB keyboard Cannot re-establish communications with
the USB keyboard.
TST 8C06 EXT IO PCI BIST test Running PCI Built-In Self-Test
WRN 8C07 EXT IO PCI BIST error PCI Built-In Self-Test failed.
WRN 8C08 SYS BD PCI alloc error PCI address space allocation failed.
WRN 8C09 SYS BD PCI mem mngr err Memory allocation for PCI device failed.
WRN 8C0A EXT IO PCI mem type err PCI device requested invalid memory
type.
WRN 8C0B SYS BD PCI max bus dpth PCI bus depth exceeded maximum
supported depth.
WRN 8C0C EXT IO PCI dev not cnfg Unable to configure PCI device.
WRN 8C0F SYS BD dev tree ovrflow Data space for PCI devices is full.
WRN 8DEC SYS BD init LAN SROM Initializing the core LAN serial EPROM.
SHU 8DEC SYS BD resetting system Restarting system after core LAN
initialization.
FLT 8E10 SYS BD PARALEL port cfg Parallel port configuration failed.
FLT 8E11 SYS BD SERIAL1 port cfg Serial 1 port configuration failed.
FLT 8E12 SYS BD SERIAL2 port cfg Serial 2 port configuration failed.
FLT 8E13 SYS BD FLOPPY drive cfg Floppy drive configuration failed.
FLT 8E20 SYS BD bad USB port cfg USB port configuration failed.
WRN 9001 EXT IO no console found Search for console display device failed.
INI 9151 SYS BD init SERIAL_1 Initializing serial 1 port as console
display.
INI 9152 SYS BD init SERIAL_2 Initializing serial 2 port as console
display.
INI 915F SYS BD init unknown dev Initializing unknown device as console
display.
INI 916s EXT IO init PCI slot
s
Initializing PCI device in slot s as console
display.
INI 91DB SYS BD init SERIAL_LDB Initializing serial LDB port as console
display.
INI 9C51 SYS BD consol is SER_1 Console display is on serial port 1.
Table C-1. Chassis Codes for B2600 Workstations
Ostat Code FRU Message Description
To Next Page
Loading...
Need help?
General