HP b2600 Technical Reference

Appendix E
DC Power Supply
Removing the DC Power Supply
179
5. Remove the DC power supply from the system. To do this, you will have to slide the support arm
out of its slot. See
Figure E-6 Note that there is a component heat sink located on the system
board near the back of the power supply that can be damaged if you are not careful when
removing the power supply. See
Figure E-4.
Figure E-6 Removing the DC Power Supply
DC Power Supply

HP b2600 Specifications

General

Brand	HP
Model	b2600
Category	Desktop
Language	English