HP BL860c Deployment Guide

Table 6-7 Custom Script File Options (continued)
ValueOption
Specifies the RaidArrayID for controllers that support RaidArrayID. This is a
user-defined string to identify controllers. Currently, RaidArrayIDs are only
supported by Fibre and shared-storage controllers.
RAIDArrayID
"XXXXXXXXXXXXXXXXXXXX"
Varying length string that can consist of any of the following characters: a-z A-Z
0-9 ! @ # * ( ) , - _ + : . / [space]
This string has a maximum length that varies depending on the type of controller.
For, RA4x00 controllers, the max length is 24 characters. For, other controllers,
the max length is 20 characters. The quotes surrounding the string are optional.
Using quotes allows leading space characters to be used in the RaidArrayID.
This string cannot end in a space character.
Specifies a license key to install a controller feature.
LicenseKey
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
This is a 25-character key separated by hyphens. The hyphens are optional.
Specifies a license key to uninstall a controller feature. If the license key is
installed, it is uninstalled.
DeleteLicenseKey
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
This is a 25-character key separated by hyphens. The hyphens are optional.
Specifies the Read Cache percentage. This option is not required. If this option
is not specified, the Read/Write cache ratio remains unchanged.
ReadCache
This value is a numeric value from 0 to 100. It must form a valid read/write
cache ratio that is supported on the controller with the WriteCache option.
Specifies the Write Cache percentage. This option is not required. If this option
is not specified, the Read/Write cache ratio remains unchanged.
WriteCache
This value is a numeric value from 0 to 100. It must form a valid read/write
cache ratio that is supported on the controller with the ReadCache option.
Specifies the Rebuild Priority. This option is not required. If this option is not
specified, the Rebuild Priority remains unchanged.
RebuildPriority
• Low
• Medium
• High
Specifies the Expand Priority. This option is not required. If this option is not
specified, the Expand Priority remains unchanged.
ExpandPriority
• Low
• Medium
• High
Specifies the Surface Scan Delay in seconds. This option is not required. If this
option is not specified, the Surface Scan Delay remains unchanged.
SurfaceScanDelay
N: This value is a numeric value between 1 and 30 seconds.
Specifies the SSP State for controllers that support SSP that is enabled/disabled
on a controller basis. This option is not required. If this option is not specified,
SSPState
the SSP State remains unchanged. Currently, only Fibre and shared-storage
controllers support SSP. This command is not valid for the RA4x00 controller
because RA4x00 controllers support SSP that is enabled/disabled on a logical
drive basis.
• Enable: Enables SSP for the controller.
• Disable: Disables SSP for the controller.
58 Utilities Reference

HP BL860c Specifications

General

Brand	HP
Model	BL860c
Category	Software
Language	English