Cisco Catalyst 1GbE 3120G Blade Switch
451438-B21
Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem
410916-B21
HP Cisco B22HP Fabric Extender for BladeSystem c-Class
641146-B21
HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class
657787-B21
NOTE:
The Cisco Fabric Extender for HP BladeSystem with 16 FET - (PN 657787-B21),
comes packaged with 16 Cisco Fabric Extender Transceivers. These Cisco transceivers
can be used to connect the Fabric Extender with a parent Nexus 5000 over optical cable
up to 100 meters using OM3 grade fiber.
HP GbE2c Layer 2/3 Ethernet Blade Switch
438030-B21
NOTE:
HP Virtual Connect FlexFabric 10Gb/24-port Module for c-Class BladeSystem
(P/N 571956-B21) is not compatible with the c3000 enclosure
HP SAS Switch
HP 6Gb SAS Switch Single Pack for HP BladeSystem c-Class
BK763A
HP 6Gb SAS Switch Dual Pack for HP BladeSystem c-Class
BK764A
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/13960_na/13960_na.html
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information at:
http://h18000.www1.hp.com/products/quickspecs/13170_na/13170_na.html
HP BladeSystem
c-Class FC SAN
Interconnects
HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem
466482-B21
HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem
572018-B21
HP 4GB Fibre Channel Pass-thru Module for c-Class BladeSystem
403626-B21
Brocade 8/12c SAN Switch for BladeSystem c-Class
AJ820B
Brocade 8/24c SAN Switch for BladeSystem c-Class
AJ821B
Brocade 8/24c Power Pack+ SAN Switch for BladeSystem c-Class
AJ822B
Cisco MDS 8/12c Fabric Switch for HP BladeSystem c-Class
AW563A
Cisco MDS 8/24c Fabric Switch for HP BladeSystem c-Class
AW564A
HP MDS 8/12c Fabric Switch 12-port Upgrade LTU
NOTE:
Licensed per switch.
TA804A
HP MDS Fabric Manager Server for BladeSystem c-Class LTU
NOTE:
Licensed per switch.
TC316A
HP MDS Enterprise Package for BladeSystem c-Class LTU
NOTE:
Licensed per switch.
TC317A
HP MDS Fabric Manager Server Enterprise Package for BladeSystem c-Class LTU
NOTE
:
Licensed per switch.
TC318A
Step 4: Select rack power distribution for installing the enclosure into a rack.
NOTE:
A pair of PDUs must be ordered for AC Feed redundancy. If AC redundancy is not required, a single PDU or UPS may be
acceptable.
HP Monitored Power
Distribution Unit
HP 8.6kVA 24A Single Input Three Phase NA/JP Monitored Power Distribution Unit
AF504A
HP Two C13 PDU Extension Bar
AF500A
QuickSpecs
HP BladeSystem c3000 Enclosure
Configuration Information Factory Integrated Models
DA - 12790 North America — Version 55 — December 10, 2013
Page 13
To Next Page
Loading...
