Step 5: Select Wall Outlet Power Cords
(For connection to standard wall outlets)
NOTE:
Select one wall outlet power cord for each power supply when plugging the power supplies into a wall outlet.
NOTE:
Wall Outlet power cords should only be used with low-line (100v to 110V) power sources. If high-line power outlets are required,
safety regulations require the use of a PDU or a UPS between the c3000 enclosures power supplies and wall outlets.
NOTE:
A standard 6ft PDU power cord (C13 to C14) is included with each AC power supply, so these wall outlet power cords are not
required if you plan to plug the power supplies into a PDU or UPS.
Order the appropriate power cord for your countries standard electrical outlets.
HP Power Cords
HP C13 - Nema 5-15P US/CA 110V 10Amp 1.83m Power Cord
NOTE:
HP Power cord (6 ft) 1.83 meter 10A C-13-UL domestic power cord, for grounded
USA 110V wall outlets.
AF556A
HP C13 - JIS C8303 JP 100V 12Amp 2.0m Power Cord
NOTE:
HP Power cord 2 meter C13 Japan low-line power cord, for Japanese 100V wall
outlets.
AF572A
HP C20 - C13 WW 250V 15Amp 2.0m Jumper Cord
NOTE:
For use with PDUs accepting C20 power cords.
AF590A
NOTE:
For additional power cable information, please visit:
http://h18000.www1.hp.com/products/servers/proliantstorage/power-
protection/options/power-cable.html
QuickSpecs
HP BladeSystem c3000 Enclosure
Configuration Information Factory Integrated Models
DA - 12790 North America — Version 55 — December 10, 2013
Page 14
To Next Page
Loading...
