To Next Page

To Previous Page

Figure 17. Usage Scenario 3

Operations and maintenance

It is important to follow guidelines for operating and maintaining the HP BladeSystem c-Class solution

described in this document. You should follow the guidelines documented for the

HP BladeSystem

c-Class Onboard Administrator, for example. Maintenance documentation for the BL480c, the SB40c,

and the

BladeSystem c7000 Enclosure should also be followed.

Upgrade and migration documentation is also available (or may become available) for the HP

BladeSystem c-Class Onboard Administrator, the

BL480c, the SB40c, and the BladeSystem c7000

Enclosure.

HP BladeSystem c-Class Onboard Administrator (

see this page)

Perform regular maintenance <

See this page for BL480c>

Upgrade and migrate <

See this page for BL480c>

Other manuals for HP BladeSystem c7000

Questions and Answers:

Need help?

Do you have a question about the HP BladeSystem c7000 and is the answer not in the manual?

General

Form Factor	10U
Number of Bays	16
Redundant Power	Yes
Redundant Fans	Yes
Maximum Blade Servers	16 half-height or 8 full-height
Operating Temperature	10° to 35°C (50° to 95°F)
Power Supplies	Up to 6
Cooling Fans	10
Management	Onboard Administrator
Interconnect Modules	Up to 8
Networking Options	Ethernet, Fibre Channel, InfiniBand
Compatibility	HP ProLiant and Integrity server blades
Relative Humidity	10% to 90% (non-condensing)