Starting Your HP Brio
10
Starting Your HP Brio
To start the PC for the first time, press the On/Off button.
Setting Up Windows
Do not switch off the PC while the software is being initialized as this
could cause unexpected results.
1 Turn on the monitor first, and then the PC (see “Starting Your HP Brio”
above). The light on the front panel comes on.
2 The software initialization routine starts. During this time, you will be
asked to carry out various tasks such as selecting the regional settings
to be used on your PC.
3 After the initialization routine has finished, click on OK and the HP Brio
will restart.
On/Off Button &
Power On
Status Light
Hard Drive Activity
Light
To Next Page
Loading...
