Clearing Your PC’s CMOS (BIOS) Settings
75
2 Changethepositionofswitch1toONtoclearbothCMOSand
passwords. If you want to clear passwords only, set switch 2 to ON. Note
that other BIOS settings will remain unchanged.
3 Replace the main cover and reconnect the power cord.
4 Switch on the PC and wait for the message “settings have been cleared”
to appear.
5 Shut down the PC, remove the cover and power cord and set switch 1
to OFF. Set switch 2 to OFF if you have been resetting passwords only.
6 Restart the PC and press F2 to enter the Setup program when
prompted. You now have full access to the Setup program. For more
information on Setup, refer to page 72.
Switch Switch function:
1
CMOS OFF = normal (default)
ON = clear CMOS and reload default values in Setup
2
Password OFF = enabled (default)
ON = disabled/clear User and Administrator passwords
3
Reserved OFF = default
4
Reserved OFF = default
To Next Page
Loading...
