Table 3-9 Internet connection sharing does not work
This occurs because Internet Connection
Sharing was enabled when Bluetooth was
installed (this is a Microsoft Windows behavior
and is considered proper operation).
To enable Internet Connection Sharing:
•
Disable Sharing for the Ethernet adapter
•
Select Control Panel then Network and
Dial-up Connections.
•
Right-click Local Area Connection,
select Properties, and then select the
Sharing tab.
•
Clear the check box for Enable Internet
Connection Sharing for this
connection, and then click OK.
•
Re-enable Sharing for the Ethernet adapter
and select (check) the sharing box.
If you are prompted to select an adapter, select
Bluetooth network adapter. (This option is not
displayed unless more than one adapter is
available.)
If prompted, restart the computer.
Table 3-10 Unknown port message when using a Bluetooth serial port
The Unknown Port error message usually
means an attempt was made to connect a port
that was in use. Additional Bluetooth Serial
Ports can be added if they are required.
Either wait until the port is available or add
additional ports.
Chapter 3
54 HP bt500 Bluetooth USB 2.0 Wireless Printer Adapter
To Next Page
Loading...
Need help?
General
