c. Lift the top edge of the display panel (3) and swing it up and forward until it rests upside down on
the computer.
d. Release the adhesive support strip (1) that secures the display panel cable connector to the display
panel.
e. Disconnect the display panel cable (2) from the display panel.
f. Remove the display panel (3).
The display panel is available using the following spare part numbers:
● L51917-001 – For use only on computer models equipped with an anti glare, SVA, non-touch
display assembly
● L51918-001 – For use only on computer models equipped with an anti glare, UWVA, non-
touch display assembly
● L51919-001 – For use only on computer models equipped with a BrightView, UWVA, touch
display assembly
44 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
