HP Color LaserJet CM2320 - Multifunction Printer - Event-log messages

Control panel message Event log error message Description Recommended action
59.70 Error
Turn off then on
59.7000 The product has experienced a
black developer motor startup
error.
1. Turn off the power by using
the power switch, and then
wait at least 30 seconds.
2. Turn on the power and wait
for the product to initialize.
If the error persists, replace the
developer motor.
If the error persists, replace the
DC controller.
59.73 Error
Turn off then on
59.7300 The product has experienced a
yellow-magenta-cyan developer
motor startup error.
1. Turn off the power by using
the power switch, and then
wait at least 30 seconds.
2. Turn on the power and wait
for the product to initialize.
If the error persists, replace the
developer motor.
If the error persists, replace the
DC controller.
59.80 Error
Turn off then on
59.8000 The product has experienced a
black developer motor rotation
error.
1. Turn off the power by using
the power switch, and then
wait at least 30 seconds.
2. Turn on the power and wait
for the product to initialize.
If the error persists, replace the
developer motor.
If the error persists, replace the
DC controller.
59.83 Error
Turn off then on
59.8300 The product has experienced a
yellow-magenta-cyan developer
motor rotation error.
1. Turn off the power by using
the power switch, and then
wait at least 30 seconds.
2. Turn on the power and wait
for the product to initialize.
If the error persists, replace the
developer motor.
If the error persists, replace the
DC controller.
59.9 Error
Turn off then on
59.9000 The product has experienced an
ITB motor startup error.
1. Turn off the power by using
the power switch, and then
wait at least 30 seconds.
2. Turn on the power and wait
for the product to initialize.
If the error persists, replace the
ITB.
If the error persists, replace the
drum motor.
Table 7-12 Control-panel messages (continued)
ENWW Control-panel messages 265