Troubleshooting
Maintenance and Service Guide 2–5
Selecting from the Advanced Menu
Table 2-3
Advanced Menu
Select To Do This
Language Change the Computer Setup language.
Boot Options Enable/disable:
■ QuickBoot, which starts the notebook more
quickly by eliminating some startup tests.
If you suspect a memory failure and want
to test memory automatically during startup,
disable QuickBoot.
■ MultiBoot, which sets a startup sequence that
can include most bootable devices and media
in the system.
Device Options
■ Enable/disable the embedded numeric
keypad at startup.
■ Enable/disable multiple standard pointing
devices at startup. To set the notebook to
support only a single, usually nonstandard,
pointing device at startup, select Disable.
■ Enable/disable USB legacy support for a
USB keyboard. When USB legacy support
is enabled, the keyboard works even when
a Windows operating system is not loaded.
■ Set an optional external monitor or overhead
projector connected to a video card in a Port
Replicator as the primary device. When the
notebook display is set as secondary,
the notebook must be shut down before it is
undocked from a Port Replicator.
To Next Page
Loading...
Need help?
General