HP Compaq dc5700 MT User Manual

Service Reference Guide, dc5700 437804-001 6–13
Removal and Replacement Procedures— Microtower (MT) Chassis
c. If removing a PCI Express x16 card, pull the retention arm on the back of the expansion
socket away from the card and carefully rock the card back and forth until the connectors
pull free from the socket. Pull the expansion card straight up from the socket then away
from the inside of the chassis to release it from the chassis frame. Be sure not to scrape
the card against the other components.
5. Store the removed card in anti-static packaging.
6. If not replacing the old expansion card with a new expansion card, install an expansion slot
cover to close the open slot. Insert the metal slot cover in the opened slot and slide the slot
cover lock down to secure the slot cover in place.
Ä
CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot
cover for proper cooling of internal components during operation.

HP Compaq dc5700 MT Specifications

General

Chipset	Intel Q965 Express
Audio	Integrated High Definition audio
Network	Integrated Broadcom NetXtreme Gigabit Ethernet
Power Supply	300W
Form Factor	Microtower
Processor	Intel Pentium D, Intel Celeron D
Memory	Up to 4 GB DDR2
Graphics	Intel Graphics Media Accelerator 3000
Optical Drive	DVD-ROM
Expansion Slots	1 PCI Express x16
Ports	USB 2.0, VGA, serial, parallel
Operating System	Windows XP Professional, Windows Vista
Storage	SATA Hard Drive