HP Compaq dc7100 MT

2–38 www.hp.com Hardware Reference Guide
Hardware Upgrades
Partitioning and Formatting a MultiBay Hard Drive
✎
You must be logged on as an Administrator or a member of the
Administrators group in order to complete this procedure.
1. Exit all software applications, turn off the computer properly
through the operating system, then turn off any external devices.
2. Insert the MultiBay hard drive into the MultiBay as shown in the
“Inserting a Drive into the MultiBay” section.
3. Turn on the computer.
4. Click Start.
5. Right-click My Computer, then click Manage.
6. Click Storage, then double-click Disk Management.
7. Right-click the MultiBay hard drive, then click Partition.
Carefully read and respond to any prompts that appear on the
screen.
Refer to the online Help (click Action > Help) for additional
information.