Service Reference Guide, d300, dx6050 319865-008 8–5
Removal and Replacement Procedures— Desktop (DT) Chassis
8.5 Computer Cover
1. Prepare the computer for disassembly (Section 8.1, “Preparation for Disassembly”).
Ä
CAUTION: Before removing the computer access panel, ensure that the computer is turned off and that
the power cord is disconnected from the electrical outlet.
2. Loosen the two captive thumbscrews 1 that secure the computer cover to the computer
chassis.
3. Slide the computer cover 2 back about 1 inch (2.5 cm), then lift it off the unit.
To install the computer cover, reverse the removal procedure.
To Next Page
Loading...
