8–6 319865-008 Service Reference Guide, d300, dx6050
Removal and Replacement Procedures— Desktop (DT) Chassis
8.6 Front Bezel
1. Prepare the computer for disassembly (Section 8.1, “Preparation for Disassembly”).
2. Remove the computer cover (Section 8.5, “Computer Cover”).
3. Pull up on the two release tabs on the left side of the bezel and push the release tab on the
right side of the bezel in toward the center of the chassis 1, then rotate the front bezel away
from the chassis to release it 2.
To reinstall the front bezel, reverse the removal procedure
To Next Page
Loading...
