HP Compaq dx6050 MT - Front Drive Bezels; Drive Bezel Blank

Service Reference Guide, d300, dx6050 319865-008 8–7
Removal and Replacement Procedures— Desktop (DT) Chassis
8.7 Front Drive Bezels
1. Prepare the computer for disassembly (Section 8.1, “Preparation for Disassembly”).
2. Remove the computer cover (Section 8.5, “Computer Cover”).
3. Remove the front bezel (Section 8.6, “Front Bezel”).
8.7.1 5.25" Drive Bezel Blank
Pinch the two small retaining clips 1 on the right side of the bezel blank and rotate the blank out
of the front bezel 2.
To install a bezel blank, reverse the removal procedure.