5ā10 Maintenance and Service Guide
Removal and Replacement Procedures
ā
The Mini PCI communications/memory module slot cover
is included in the Miscellaneous Plastics/Hardware Kit, spare
part number 348350-001.
d. Disconnect the 2 antenna cables
1 from the Mini PCI
communications board.
e. Spread the retaining tabs
2 securing the Mini PCI
communications board to the system board.
The edge of the Mini PCI communications board rises at a
45-degree angle.
f. Pull the Mini PCI communications board away from the
connector at a 45-degree angle
3.
Removing the Mini PCI Communications Board
Reverse the preceding procedures to install the Mini PCI
communications board.
To Next Page
Loading...
Need help?
General
