Q Menu and Desktop Video Profiles
Software Guide 2–13
Portrait-Secondary
To switch the image counterclockwise to portrait view from
landscape view:
» Select the Portrait-Secondary item.
The default Portrait-Primary item switches the image
clockwise to portrait view. Left-handed users may find the
Portrait-Secondary item, which switches the image
counterclockwise to portrait view, more convenient.
✎
HP recommends that you not use the Portrait-Secondary view
while using the internal wireless. The positions commonly
occupied by the tablet PC, external devices, and the user while
the tablet PC is in the Portrait-Secondary view may obstruct the
antennas.
The antennas are not visible from the outside of the tablet PC.
When the tablet PC is in the portrait position, with the
pen-activated buttons in the upper left corner, the antennas are on
the right and left sides of the tablet PC, near the upper corners.
For exact antenna locations, refer on this CD to the Hardware
Guide, “External Components” chapter. Antenna locations are
illustrated in the “Right Side: Jog Dial and Antenna” and
“Left Side: Security Cable Slot, Vent and Antenna” sections.
334243-001.book Page 13 Friday, August 15, 2003 10:22 AM