HP Data Protector A.06.11 - Multiple sites

-noexpand
Do not expand client names. Use this option if object was backed up with different
client name resolution as when using this option.
-strip
This option works in three different ways. If sessionID is specified it strips the
detail catalogs for all objects of session with specified SessionID. If both SessionID
and ObjectName are specified it strips the detail catalog of the object identified
by ObjectName for the session with specified SessionID. If no option is specified,
it strips catalogs on all data objects that are no longer protected.
-strip NumberOfDays
This option can be used with ObjectName to strip the detail catalogs for all
versions of specified object that are older than NumberDays days.
-fileversions FileName
Displays information on all sessions which contain the filesystem with specified
file FileName, session ID, mode, date modified, size and type.
-media
Shows list of the media used in the backup session. If object is also specified
then it only shows list of media containing that object.
-user_location
This option changes the output of media related reports to print out user defined
location instead of physical location used by default.
-change_protection Protection
Changes the current protection of the object versions identified by ObjectName
and/or SessionID to the new protection defined as Protection. If it is specified
without any other option then it changes protection for all Failed/Aborted objects.
Protection can be none, permanent, until a specific date, or for a time interval.
When the protection is until a specified date or for a time interval, you must
specify the value. The Date form is [YY]YY/MM/DD. In the first case the value
is the date until which the data is protected. In the second case the time interval
is the number of days (after today) during which the data can not be overwritten.
-change_catprotection Protection
Changes the current protection of the catalog retention time. Protection can
be none, same_as_data_protection, until a specific date, or for a time
interval. same_as_data_protection means that catalog will stay until data
is overwritten/exported. When the protection is until a specified date or for a
time interval, you must specify the value. The Date form is [YY]YY/MM/DD. In
the first case the value is the date until which the data is protected. In the second
case the time interval is the number of days (after today) during which the data
can not be overwritten.
Command line interface reference 107