omnidbupgrade
converts filenames in the IDB to the new internal character encoding used in Data
Protector A.06.11 and thus enables the correct handling of non-ASCII characters in
filenames in the Data Protector GUI
nl
(this command is available on the Data Protector Cell Manager)
omnidbupgrade
SYNOPSIS
omnidbupgrade -version | -help
omnidbupgrade -fname -udp
omnidbupgrade -fname -estimate
DESCRIPTION
Omnidbupgrade converts filenames in the IDB to the new character encoding
introduced in Data Protector A.06.11. The conversion can be performed only on
Windows Cell Manager for all non-Windows clients containing filenames with
non-ASCII characters. The command will convert filenames for all clients not marked
as already converted from the old character encoding to the new one.
The IDB conversion does not affect backup and restore. If conversion of data for a
specific client is running and at the same time backup of the same client is started,
no filenames or directories will be logged to the IDB for this client (as if log none
option in GUI was used for backup).
Back up the IDB before running omnidbupgrade.
OPTIONS
-version
Displays the version of the omnidbupgrade command
-help
Displays the usage synopsis for the omnidbupgrade command.
-fname -udp
Converts filenames in the IDB.
-fname -estimate
Estimates the time needed for the conversion. This option is possible only before
IDB conversion has been performed.
Command line interface reference 315
To Next Page
Loading...
Need help?
General