omnimcopy
makes a copy of a Data Protector medium using Data Protector backup devices as
the source and destination
nl
(this command is available on systems with the Data Protector User Interface
component installed)
omnimcopy
SYNOPSIS
omnimcopy -version | -help
omnimcopy -copy BackupDevice [-slot Slot...] -from BackupDevice
[-src_slot Slot...] [BasicOptions] [LabelOptions]
omnimcopy -ams [-from VLS_SMART_COPY -src_slot SourceTapeBarcode]
[-copy VirtualTapeLibrary] [-slot TargetTapeBarcode] [-pool Pool-
Name BasicOptions] [LabelOptions]
BasicOptions
-pool PoolName
-location Location
-force
-size SpecSize
-encrypt
-eject
-permanent | -until Date
Date = [YY]YY/MM/DD (1969 < [YY]YY < 2038)
LabelOptions
-label UserLabel [-no_barcode_as_label] | -autolabel |
-[no_]barcode_as_label
DESCRIPTION
The omnimcopy copies a Data Protector medium. It reads data from the input medium
and writes the data to the output medium. Note that the output medium is first
initialized. During initialization, a medium is assigned a:
• Data Protector Medium Label: Depending on the selected options, the media
labels can be user defined or generated automatically. By default, Data Protector
automatically generates media labels from the media pool names, unless the Use
barcode as media label during initialization option is selected
in the library properties. This behavior can be changed during the initialization
Command line interface reference 143
To Next Page
Loading...
Need help?
General