omniamo
starts an automated media operation session
nl
(this command is available on the Data Protector Cell Manager)
omniamo
SYNOPSIS
omniamo -version | -help
omniamo -amc ConfigurationName {-post_backup | -scheduled}
DESCRIPTION
This command starts an automated media operation session for the specified
post-backup or scheduled configuration. Before starting a post-backup operation,
you must export the session ID of the backup session that used the media you want
to copy.
On Windows: set SESSIONID=SessionID
On UNIX: export SESSIONID=SessionID
Use this command if you want to immediately start an automated media operation.
Also, if an automated media operation has failed, you can use this command to start
the operation again.
OPTIONS
-version
Displays the version of the omniamo command.
-help
Displays the usage synopsis for the omniamo command.
-amc ConfigurationName {-post_backup | -scheduled}
Starts the post-backup or scheduled automated media copy operation with the
specified name.
EXAMPLES
1. To start the scheduled automated media copy operation with the configuration
name "MediaCopy1", run:
omniamo -amc MediaCopy1 -scheduled
Command line interface reference 49
To Next Page
Loading...
Need help?
General