omnimlist
lists the contents of a Data Protector medium
nl
(this command is available on systems with the Data Protector User Interface
component installed)
omnimlist
SYNOPSIS
omnir -version | -help
omnimlist -device BackupDevice [-slot SlotID [Side]] [-monitor]
[-detail]
omnimlist -device BackupDevice [-slot SlotID [Side]] [-header]
[-monitor]
omnimlist -device BackupDevice -session [-slot SlotID [Side]]
[-monitor] [-detail]
omnimlist -device BackupDevice -session SessionID [-slot SlotID
[Side]] [-monitor] [-detail]
omnimlist -device BackupDevice -catalog [-slot SlotID [Side]]
[-monitor]
omnimlist -device BackupDevice -catalog DiskAgentID [-slot SlotID
[Side]] [-monitor]
DESCRIPTION
The omnimlist command lists the contents of a Data Protector medium. The
command scans the catalog (index) of the medium and shows all objects and sessions
on the medium.
The command can also be used to display the Data Protector medium tape header.
If used for such purpose, the command reads the first block of the tape and then
displays the information.
OPTIONS
-version
Displays the version of the omnimlist command.
-help
Displays the usage synopsis for the omnimlist command.
-device BackupDevice
Command line interface reference 151
To Next Page
Loading...
Need help?
General