omnistoreapputil
acts as a user interface to Storage Appliances, such as VLS
nl
(this command is available on the Data Protector Cell Manager)
omnistoreapputil
SYNOPSIS
omnistoreapputil -version | -help
omnistoreapputil [-check_connection] -hostname HostName -port
PortNumber -user UserName -password Password -certificate_name
CertificateName -check_vls
omnistoreapputil [-download_certificate] -hostname HostName -port
PortNumber -user UserName -password Password -certificate_name
CertificateName
DESCRIPTION
The omnistoreapputil command is used as a user interface for the Storage
Appliances, such as VLS. It is used to check the connection to the Storage Appliance.
The omnistoreapputil command is part of the Cell Manager package and can
be installed on all Data Protector Cell Manager platforms.
OPTIONS
-version
Displays the version of the omnistoreapputil command.
-help
Displays the usage synopsis for the omnistoreapputil command.
-check_connection
Checks the connection between Data Protector and the Storage Appliance.
-hostname HostName
Specifies a name of a VLS client.
-port PortNumber
Sets the TCP/IP port number for the Storage Appliance.
-user UserName
Sets the username that is used by Data Protector to establish the connection to
the Storage Appliance.
Command line interface reference 387
To Next Page
Loading...
Need help?
General