d) To upload the "dgrules.txt" file to the server, run:
omnidbsmis -dgrules -put c:\tmp\dgrules.txt
The command reads the contents of the file, checks its syntax, and copies the
file to its location on the Cell Manager.
6. To get the information on the disk group that is the pair of a disk group named
original_disk_group configured on EVA storage system with WWN
50001FE15007CA90, run:
omnidbsmis -dgrules -check EVA1 original_disk_group
The following is the output of the command:
Configured disk group pair: 1st disk group
name:"original_disk_group" 2nd disk group
name:"paired_disk_group_name" EVA name:"50001FE15007CA90"
If there is no rule for the specified disk group, the first and second disk groups
are the same.
7. To create the EVA home configuration file or edit it, carry out the below steps
on the application or backup system:
a) To create a template EVA home configuration file or overwrite an old one
with the template,run:
omnidbsmis -caconf -init
b) To get the file for editing and to save it as "c:\tmp\cahome.txt", run:
omnidbsmis -caconf -get c:\tmp\cahome.txt
The command reads the EVA home configuration file from the SMISDB and saves
it in the "c:\tmp" directory on a local system under "cahome.txt".
c) Edit the "cahome.txt" file residing in the "c:\tmp" directory and save it.
d) To copy the "cahome.txt" file to its original place, run:
omnidbsmis -caconf -put c:\tmp\cahome.txt
The command reads the contents of the file, checks its syntax, and copies the
file back to the SMISDB.
8. To check if a DR group named DR Group 1 is part of CA+BC configuration,
run:
omnidbsmis -caconf -check DR Group 1
The following is the command output:
DR Group :"DR Group 1"Home EVA :"EVA_WWN"
9. To list all existing backup sessions, together with their session IDs and backup
specification names, run:
omnidbsmis -session
Command line interface reference 119
To Next Page
Loading...
Need help?
General