-permanent
This backup protection option provides permanent protection of backup media.
This means that the data is permanently protected from being overwritten.
-until Date
This backup protection option provides protection until a date of your choice.
This means that the data on the medium cannot be overwritten until the specified
date. Protection for the data stops at noon on the selected day.
-label UserLabel
Manually specify the medium label for the copy of the medium. A description
can have a maximum of 80 characters, including any keyboard character or
space. If the Use barcode as medium label on initialization
option is selected in the library properties, you have to specify also the
-no_barcode_as_label option.
-autolabel
If this option is specified, the medium is labeled automatically by the Data
Protector media management system.
-barcode_as_label
Data Protector uses barcode as a medium label during the initialization of the
medium instead of generating media labels based on the media pools names.
This option is supported only on library devices with enabled barcode support.
-no_barcode_as_label
Data Protector does not use barcodes as a medium label during the initialization
of the medium, but generates media labels based on the media pools names.
This option can be used to override the Use barcode as medium label
on initializationoption (if it is selected) in the library properties in the
Data Protector GUI.
SEE ALSO
omniamo(1), omnidownload(1), omniminit(1), omnimlist(1), omnimm(1), omnimnt(1),
omnimver(1), omniupload(1), sanconf(1M), uma(1M)
146
To Next Page
Loading...
Need help?
General