HP Data Protector A.06.11 - Page 168

EXAMPLES
The following examples illustrate how the omnimnt command works.
1. To satisfy a mount request issued by device "DAT1" in a session with SessionID
"R-2008/05/05-275", run:
omnimnt -device DAT1 -session R-2008/05/05-275
2. To cancel device for the backup device "Juke" in the session with SessionID
"R-2008/05/25-3", run:
omnimnt -device Juke -session R-2008/05/25-3 -cancel
SEE ALSO
omniamo(1), omnidownload(1), omnimcopy(1), omniminit(1), omnimlist(1),
omnimm(1), omnimver(1), omniupload(1), sanconf(1M), uma(1M)
168