HP Data Protector A.06.11 - Page 193

-sybase Client:ObjectName
Selects the Sybase object identified by Client:ObjectName for object
verification.
-mssps Client:ObjectName
Selects the Microsoft SharePoint Portal Server object identified by
Client:ObjectName for object verification.
-vmware Client:ObjectName
Selects the VMware Virtual Infrastructure object identified by
Client:ObjectName for object verification.
RETURN VALUES
See the man page omniintro for return values.
Additional return values of the omniobjverify command are:
10 There was an error while verifying some files. All agents completed
successfully.
11 One or more agents failed, or there was a database error.
12 None of the agents completed the operation.
13 Session was aborted.
EXAMPLES
1. To start an interactive object verification session for verifying one WinFS object
"system.company.com:/C 'Object1'" from session 2009/02/06-1, using the
original host as the verification host, run:
omniobjverify -winfs system.company.com:/C 'Object1'
-session 2009/02/06-1
2. To start an interactive verification session for verifying two filesystem objects
"system1.company.com:/ 'Label1'" and "system1.company.com:/ 'Label2'"
from session 2009/03/01-2, on host "system2.company.com", run:
omniobjverify -verify_on_host system2.company.com
-filesystem system1.company.com:/ 'Label1' -session
2009/03/01-2 -filesystem system1.company.com:/ 'Label2'
-session 2009/03/01-2
Command line interface reference 193