-remhost RoboticsHostname
Use the -remhost option to specify the client with the attached library device,
if the library device is connected to a system other than mahost (Media Agent
host)
VRDA_Options
-daid DAID
Disk Agent ID of the database backup.
-overwrite | -no_overwrite
By default, or if the -overwrite option is specified, the already existent files
on the disk are overwritten by the restored files. If the -no_overwrite option
is specified, only the files that do not exist on the disk are restored.
Media Options
-maid mediumID1 [mediumID2...]
Lists media IDs needed for the restore.
-slot slot1[:flip1] [slot2[:flip2]...]
Lists the slots where media are located. Note that the sequence has to match the
sequence in the list created using the -maid option.
-position segment1:offset1 [segment2:offset2...]
Lists media positions of the database backup. Note that the sequence has to
match the sequence in the list created using the -maid option.
General Options
-verbose
By default, the MA and DA messages are not displayed. If this option is specified
they are displayed.
-tree path1 [path2...]
Specifies the IDB directories and their subordinate files and subdirectories to be
restored. If this option is not specified, all IDB directories are restored.
-preview
Runs the restore preview.
-skiprestore
Does not start the actual restore. This option should only be used in combination
with the -save, -optview or -logview option.
-keyfile Path
Triggers the retrieval of a decryption key. By default, the
IDB-ClientName-key.csv file is read.
Command line interface reference 311
To Next Page
Loading...
Need help?
General