-interface{0 | 1}
Sets the type of SCSI interface used to access library robotics. This option is to
be used only with backup devices with library robotics connected to an NDMP
Server. 0 sets the standard SCSI interface (the default value). 1 sets the NDMP
protocol interface and must be specified for backup devices with library robotics
connected to an NDMP Server. The default value is 0.
-tty
Forces the uma command to enter the command line interface mode or to read
from script. This option is obligatory on UNIX, MPE/iX, and NetWare systems.
On Windows systems, this option is not to be used; the command line interface
mode is invoked automatically.
-barcode
If this variable is set, the uma command's stat command displays also the
barcode information for each medium.
-device deviceFile_1 [deviceFile_n...]
Specifies the device file (UNIX systems) or the SCSI address (Windows systems)
of one or more autochanger drives. For a multi-drive autochanger, you must
specify a list of device files/SCSI addresses which correspond to the
autochanger's drives in ascending order. The drives have to be known to uma
in order for the offl command to work. This option is only to be used together
with -type option.
-type DeviceType
Specifies the media type for the media in the device specified by the -device
option. Media type numbers are defined in the HP Data Protector product
announcements, software notes, and references. The media type number for VLS
is 0.
-ddt NDMP_server_name NDMP_port_number backup_type username
password
This option is mandatory for backup devices with library robotics connected to
an NDMP Server (to a supported NAS device). It specifies the NDMP Server
name, port number used by Data Protector to connect to the NDMP Server and
username and password used by Data Protector to connect to the NDMP server.
The backup_type parameter has to be set to dump.
-vls_address VLSAddress
Specifies the IP address or the hostname of the VLS client.
-vls_port VLSPort
Specifies the VLS port number.
-vls_username VLSUsername
Command line interface reference 405
To Next Page
Loading...
Need help?
General