On a disk array, there must already exist a replica that can be reused. Only
replicas that are not marked for instant recovery (are not part of the replica set)
or include no snapshots that are listed in the VA LUN exclude file can be reused.
Any replica which is not marked for instant recovery or includes no snapshots
which are listed in the VA LUN exclude file can be reused.
-leave_version
By default, Data Protector automatically sets this option if the
-instant_recovery option is specified.
If configuring a ZDB-to-tape session (the -instant_restore option is not
specified), specify this option if you wish to keep the replica on a disk array after
the ZDB-to-tape session is completed. In this case, the replica will not be available
for instant recovery, but can be reused in future backup sessions using the same
backup specification with the option -use_existing_snapshot specified.
If this option is not specified, the replica is deleted after the backup session is
completed.
-leave_enabled_bs
To specify this option, the -leave_version option has to be specified. By
default, Data Protector dismounts the filesystems on the backup system after each
backup. If this option is specified, the filesystems remain mounted after the backup
is finished.
Thus, you can use the backup system for some data warehouse activity afterwards,
but not for instant recovery.
By default, this option is not selected.
-lun_security
Specify this option if you want to apply the LUN security to the child LUNs (target
volumes or snapshots) that the integration creates.
If Secure Manager is activated on HP StorageWorks Virtual Array, you must
specify this option and configure passwords correctly, otherwise the backup
sessions will fail.
The LUN security is set using the omnidbva command.
By default, this option is not selected.
ENTERPRISE_VIRTUAL_ARRAY_OPTIONS
-snapshot-smis app_sys bck_sys
Instructs the omnicreatedl command to create an HP StorageWorks Enterprise
Virtual Array snapshot backup specification file and sets the application system
app_sys and the backup system bck_sys.
-instant_recovery
Command line interface reference 91
To Next Page
Need help?
General