HP DL385 - ProLiant - G5 - Access the Product Rear Panel; Cable Management Arm with Left-Hand Swing; Cable Management Arm with Right-Hand Swing

Operations 29
Access the product rear panel
Cable management arm with left-hand swing
To access the server rear panel, open the cable management arm.
Cable management arm with right-hand swing
NOTE: To access some components, you may need to remove the cable management arm.
To access the product rear panel components, open the cable management arm:
1. Power down the server (on page 23).
2. Swing open the cable management arm.
3. Remove the cables from the cable trough.