HP E-MSM720

A-3
Specifications
Cabling Standards
Ethernet
■ Four RJ-45 auto-sensing 10/100/1000 (IEEE 802.3 Type 10Base-T, IEEE
802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T); Duplex:
10Base-T/100Base-TX: half or full; 1000Base-T: full only.
■ 2 dual-personality ports: each port can be used as either an RJ-45 10/100/
1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX;
IEEE 802.3ab 1000Base-T Gigabit Ethernet) or as a SFP slot (for use with
SFP transceivers)
■ IEEE 802.3ad Link Aggregation Protocol (LACP) supported on all ports
Cabling Standards
Table A-1. Technology Standards and Safety Compliance
Laser safety information
Technology Compatible with these IEEE
standards
EN/IEC
standard
compliance
SFP
("mini-GBIC") Lasers
10-T
100-TX
1000-T
IEEE 802.3 10BASE-T,
IEEE 802.3u 100BASE-TX,
IEEE 802.3ab 1000BASE-T
100-FX
IEEE 802.3u 100BASE-FX EN/IEC 60825 Class 1 Laser Product
Laser Klasse 1
100-BX
IEEE 802.3ah 100BASE-BX10 EN/IEC 60825 Class 1 Laser Product
Laser Klasse 1
1000-SX
IEEE 802.3z 1000BASE-SX EN/IEC 60825 Class 1 Laser Product
Laser Klasse 1
1000-LX
IEEE 802.3z 1000BASE-LX EN/IEC 60825 Class 1 Laser Product
Laser Klasse 1
1000-LH
(not an IEEE standard) EN/IEC 60825 Class 1 Laser Product
Laser Klasse 1