Table 2-3 Display components and their descriptions
Component Description
(1) WWAN antennas (select products only)* Send and receive wireless signals to communicate with wireless wide
area networks (WWANs).
(2) WLAN antennas* Send and receive wireless signals to communicate with wireless local
area networks (WLANs).
(3) Ambient light sensors (2) Adjust the brightness of the display, depending on the ambient light.
(4) Internal microphones (2) Record sound.
(5) Camera(s) Allow(s) you to video chat, record video, and record still images.
Some cameras also allow a facial recognition logon to Windows,
instead of a password logon.
NOTE: Camera functions vary depending on the camera hardware
and software installed on your product.
(6) Camera privacy cover By default, the camera lens is uncovered, but you can slide the
camera privacy cover to block the camera's view. To use the camera,
slide the camera privacy cover in the opposite direction to reveal the
lens.
NOTE: If you have both front-facing and rear-facing cameras, when
one camera lens is revealed and ready to use, the other is concealed.
(7) Camera light On: The camera is in use.
*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately around the
antennas free from obstructions.
For wireless regulatory notices, see the section of the Regulatory, Safety, and Environmental Notices that applies to your country or
region.
To access this guide:
▲ Type HP Documentation in the taskbar search box, and then select HP Documentation.
Display 7
To Next Page
Loading...
Need help?
General
