HP Elite Dragonfly Max User Manual

2. Remove the two Phillips M2.0 × 3.0 screws (2), and then remove the audio board from the computer (3).
Reverse this procedure to install the audio board.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table
5-9 Touchpad description and part number
Description Spare part number
Touchpad M45176-001
Touchpad cable (included in Cable Kit, models without WWAN) M42293-001
Touchpad cable (included in Cable Kit, models with WWAN) M48385-001
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 29).
2. Remove the bottom cover (Bottom cover on page 29).
3. Remove the battery (see Battery on page 30).
Remove the touchpad:
1. Disconnect the touchpad cable from the touchpad ZIF connector (1), and then release the cable from the
adhesive that secures it to the touchpad (2).
2. Remove the three Phillips M2.0 × 2.0 screws (3) that secure the touchpad to the computer.
40 Chapter 5 Removal and replacement procedures for authorized service provider parts

HP Elite Dragonfly Max Specifications

General

Storage	Up to 2 TB PCIe NVMe SSD
Graphics	Intel Iris Xe Graphics
Processor	Intel Core i5-1135G7 or i7-1185G7
Display	1920 x 1080
RAM	Up to 32GB LPDDR4x
Operating System	Windows 10 Pro
Weight	Starting at 2.49 lb (1.13 kg)
Battery	4-cell, 56 Wh Li-ion polymer
Camera	IR camera
Audio	Bang & Olufsen
Dimensions	1.61 cm
Ports	1 x HDMI 2.0, 1 x headphone/mic combo
Wireless	Intel Wi-Fi 6 AX201 (2x2) and Bluetooth 5 combo
Security	HP Sure Sense, HP Sure Click, HP Sure Start