d. Remove the hinges (4) from the display.
The hinges are available as spare part number N96454-001.
16. To remove the display panel/camera cable on models with an IR camera:
a. Disconnect the cable from the ZIF connector (1) on the camera module.
b. Peel the cable (2) off the inside of the display rear cover.
c. Remove the cable from the clips (3) along the bottom near the left hinge.
The display panel/camera cable is available as spare part number P00380-001.
17. To remove the display panel/camera cable on models with an FHD camera:
a. With the camera module removed, peel the cable (1) off the inside of the display rear cover.
b. Remove the cable from the clips (2) along the bottom near the left hinge.
The display panel/camera cable is available as spare part number P00380-001.
Display assembly
67
To Next Page
Loading...
