EasyManuals Logo

HP ELITE x2 1012 G1 User Manual

HP ELITE x2 1012 G1
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
Managing a Computer Setup DriveLock password (select products only)
CAUTION: To prevent a DriveLock-protected hard drive from becoming permanently unusable, record the
DriveLock user password and the DriveLock master password in a safe place away from your tablet. If you
forget both DriveLock passwords, the hard drive will be permanently locked and can no longer be used.
DriveLock protection prevents unauthorized access to the contents of a hard drive. DriveLock can be applied
only to the internal hard drive(s) of the computer. After DriveLock protection is applied to a drive, a password
must be entered to access the drive. The drive must be inserted into the tablet or an advanced port replicator
in order for it to be accessed by the DriveLock passwords.
To apply DriveLock protection to an internal hard drive, a user password and a master password must be set
in Computer Setup. Note the following considerations about using DriveLock protection:
After DriveLock protection is applied to a hard drive, the hard drive can be accessed only by entering
either the user password or the master password.
The owner of the user password should be the day-to-day user of the protected hard drive. The owner of
the master password may be either a system administrator or the day-to-day user.
The user password and the master password can be identical.
You can delete a user password or master password only by removing DriveLock protection from the
drive.
NOTE: For select products, a BIOS administrator password must be set before you can access the
DriveLock features.
Setting a DriveLock password
To set a DriveLock password in Computer Setup, follow these steps:
1. Start Computer Setup.
Tablets with keyboards:
1. Turn o the tablet.
2. Press the power button, and when the HP logo appears, press f10 to enter Computer Setup.
Tablets without keyboards:
1. Turn o the tablet.
2. Press the power button in combination with the volume down button until the Startup menu
is displayed, and then tap F10 to enter Computer Setup.
2. Select Security, make the selection for Hard Drive Utilities or Hard Drive Tools (select products only),
select DriveLock, and then press enter.
NOTE: For select products, you may be required to set a DriveLock password and enter the BIOS
administrator password.
3. Select the hard drive you want to protect, and then press enter.
4. Select Set DriveLock Master Password or Set DriveLock Password (select products only), and then
press enter.
5. Carefully read the warning.
6. Follow the on-screen instructions to set a DriveLock password.
7. To exit Computer Setup, select Main, select Save Changes and Exit, and then select Yes.
42 Chapter 8 Security

Table of Contents

Other manuals for HP ELITE x2 1012 G1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ELITE x2 1012 G1 and is the answer not in the manual?

HP ELITE x2 1012 G1 Specifications

General IconGeneral
Bus typeOPI
SteppingD1
Tjunction100 °C
Processor codeSR2EN
Processor cache4 MB
Processor cores2
Processor familyIntel® Core™ m3
Processor seriesIntel Core m3-6Y series
Processor socketBGA 1515
Processor threads4
Processor codenameSkylake
Processor frequency0.9 GHz
Processor cache typeSmart Cache
Processor manufacturerIntel
Processor package size20 X 16.5 mm
Conflict-Free processorYes
PCI Express slots version3.0
Processor boost frequency2.2 GHz
Processor operating modes32-bit, 64-bit
ECC supported by processorNo
Graphics & IMC lithography14 nm
PCI Express configurations1x2+2x1, 2x2, 1x4, 4x1
Supported instruction setsSSE4.1, SSE4.2, AVX 2.0
Thermal Design Power (TDP)4.5 W
Maximum number of PCI Express lanes10
Device typeTablet PC
Form factorSlate
Product colorSilver
Internal memory4 GB
Memory clock speed1866 MHz
Internal memory typeLPDDR3-SDRAM
Storage mediaSSD
Compatible memory cardsMicroSD (TransFlash)
Internal storage capacity180 GB
Display diagonal12 \
Touch technologyMulti-touch
Display resolution1920 x 1280 pixels
Graphics cardHD Graphics 515
On-board graphics card ID0x191E
On-board graphics card modelIntel® HD Graphics 515
Maximum on-board graphics card memory1.74 GB
On-board graphics card OpenGL version4.4
On-board graphics card base frequency300 MHz
On-board graphics card dynamic frequency (max)850 MHz
Rear camera typeSingle camera
Rear camera resolution (numeric)5 MP
Front camera resolution (numeric)2 MP
Country of originChina
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version4.2
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Battery capacity2800 mAh
Battery life (max)10 h
AC adapter power45 W
USB 2.0 ports quantity0
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
Sustainability certificatesENERGY STAR
PlatformWindows
Operating system architecture64-bit
Processor ARK ID88198
Intel Secure Key Technology version1.00
Intel Stable Image Platform Program (SIPP) version0.00
Weight and Dimensions IconWeight and Dimensions
Depth213.5 mm
Width300 mm
Height8.05 mm
Weight820 g

Related product manuals